Here is a 4-week action plan with low-cost, high-impact measures so you can start cutting your electricity bill right away.
Quick Savings Calculator
Move the sliders and see the annual savings potential of 3 simple actions.
Annual Savings Potential
€0
Lighting: €0
Standby: €0
Compressed air: €0
Estimate based on average assumptions (e.g. 8h/day, 250 days/year, €0.22/kWh). Real savings may vary.
Energy cost is one of the biggest headaches for any SME. As you have seen, small actions can add up to meaningful savings. Browse our 30-day plan to see how, step by step.
Week 1: Diagnosis and Easy Wins
Before acting, you need to understand. This week we focus on finding the most obvious and cost-effective energy "leaks".
Analyze Your Load Curve
Ask your electricity retailer for it. It will reveal phantom consumption at night and power peaks you can optimize.
Hunt Down Compressed Air Leaks
Compressed air leaks can be costly. Inspect, measure and work out the cost from the pressure and running hours of your system. Listen and seal!
Week 2: HVAC, the Silent Giant
HVAC can be a significant load; check your site's measured consumption before prioritizing it. Small adjustments here can have a big impact.
Adjust the Thermostat
Savings per degree depend on the equipment, climate, schedule and building; there is no universal percentage. Set reasonable temperatures (24°C in summer, 21°C in winter) and lock them in.
Clean the Filters
Dirty filters force equipment to work harder. It is one of the most cost-effective maintenance tasks there is.
Week 3: Smart Lighting and Equipment
The light that brightens your business does not have to darken your books. Time to optimize it.
Prioritize the Switch to LED
Savings versus your current fixtures will depend on their wattage and hours of use; compare them before investing. Start with the areas that stay on the longest for a faster payback.
Install Sensors and Timers
Lights in bathrooms, storage rooms and corridors do not need to stay on all the time. Automate their switch-off.
Week 4: Preventive Maintenance
A poorly maintained machine is an energy sinkhole. This week, turn maintenance into a savings tool.
Check Motors and Belts
A loose belt can hurt efficiency and speed up wear; check it as the manufacturer recommends. Lubrication matters too.
Check the Capacitor Bank
If it is faulty, it can cause hefty penalties for reactive energy on your bill without you noticing.